Detailed Product Description Standard package:
UTG-3 thickness gauge
Standard probe (single-crystal delayed probe)
Carrying case
Two 1.5V AA alkaline batteries
Couplant
Operating manual
Certification of quality
Packaging list
Operating principle:
I-E (interface-echo) mode with single-crystal delayed probe
E-E (echo-echo) mode with single-crystal delayed probe
Measuring range:
1.5mm to 25.4mm; 0.059in-1.000in in I-E mode
0.2mm to 10mm; 0.0079in-0.394in in E-E mode
Depending on probe, material and surface condition
Digital resolution:
H＜0.4in : 0.0001in/ 0.001in/ 0.01in or 0.001mm/0.01mm/0.1mm
H≥0.4in : 0.001in/ 0.01in or 0.01mm/0.1mm
Units:
Selectable: inch or mm
Display:
128×64 dot-matrix LCD screen (42mm×57mm)
EL backlight and switchable contract ratio
Digit height: 0.54in or 13.75mm
Measurement update rate:
4 Hz in standard measurement mode
25 Hz in MIN capture mode
Material velocity range:
1000 to 9999 m/s; 0.039 to 0.394 inch/µs
Power:
Two 1.5V AA alkaline batteries
Warning with low battery voltage
Operating time:
Up to 200 hours (without backlight) with alkaline batteries, depending on operating mode
Auto shut-off:
After 5 minutes of non-use
Operating temperature:
-10℃ to +50℃; +14℉ to +122℉
Specification to -20℃/-4℉ on request
Size:
149mm×73mm×32mm (H×W×D)
Weight:
200g; 7oz (including batteries)
Data logger capacity:
Up to 500 readings can be divided into a maximum of 5 files (user-selectable)
Optional accessories:
Attachable rubber case
4-step/6-step block for calibration
Data transmission cable
Application software
Operating language:
English and Chinese
Application software:
UMVIEW
Interfaces:
Serial RS 232C port in combination with a communicative cable;